Tile Calculator
Estimate tile coverage, waste-adjusted quantity, boxes to purchase and material cost using metric or imperial measurements.
🔒 Values remain in your browser.
Quantity, packages and cost
Calculation components
Planning note
Waste allowance scenarios
Estimate tile coverage, waste-adjusted quantity, boxes to purchase and material cost using metric or imperial measurements. Adjust the inputs above for an instant report.
What this calculator tells you
Estimate tile coverage, waste-adjusted quantity, boxes to purchase and material cost using metric or imperial measurements.
Formula and method
Required tile area = length × width × (1 + waste%); boxes = ceiling(required area ÷ coverage per box)
Full precision is retained internally and display rounding is applied at the end.
How to use: Tile Calculator
- Enter values in the stated units.
- Review the primary result and supporting metrics.
- Test sensitivity scenarios.
- Check the visible method and limitations.
- Copy, share or print the result.
What each input means
Floor length
Measured length of the tiled area.
Floor width
Measured width of the tiled area.
Waste allowance (%)
Extra tile for cuts, breakage, matching and future repairs.
Coverage per box
Area covered by one full box of tile.
Cost per box
Supplier price for one box.
Worked input example
Change any input to model your own scenario.
How to understand the result
Use the primary answer with supporting metrics and sensitivity cases. Do not treat a rounded value as more precise than its inputs.
Important information and limitations
- Inputs must use the stated units and assumptions.
- Zero denominators and impossible targets may produce a warning.
- Verify important decisions independently.
Frequently asked questions
What does this calculator calculate?
Estimate tile coverage, waste-adjusted quantity, boxes to purchase and material cost using metric or imperial measurements.
How do I calculate tile?
Enter the values in the stated units and review the visible formula: Required tile area = length × width × (1 + waste%); boxes = ceiling(required area ÷ coverage per box)
Tile Calculator: How accurate is it?
Full browser precision is used before display rounding. Accuracy depends on the inputs and assumptions. Required tile area = length × width × (1 + waste%); boxes = ceiling(required area ÷ coverage per box)
Tile Calculator: Is this calculator free?
Yes. It is free, needs no account and calculates locally.
Tile Calculator: Can I share the result?
Yes. Use Copy or Share to preserve the scenario.
Accuracy, privacy and methodology
Calculations run locally. Inputs are not uploaded. Formulas, assumptions and limitations remain visible for verification.
Sources and further reading
Related calculators
Square Footage Calculator
Estimate rectangular floor area, waste-adjusted material quantity, package count and material cost in imperial or metric units.
Calculate →ConstructionConcrete Calculator
Estimate slab concrete volume, waste-adjusted order quantity and material cost using imperial or metric dimensions.
Calculate →ConstructionPaint Calculator
Estimate paint quantity from surface area, coverage, coats, and purchasable container rounding.
Calculate →ConstructionFlooring Calculator
Estimate flooring area, waste-adjusted material, whole packages and project material cost in metric or imperial units.
Calculate →